Operation principle and operation process of electric scissors

責(zé)任編輯：　　錄入時(shí)間：2020-12-15　　閱讀次數(shù)：2629

Principle of use

The motor drives the eccentric shaft connecting rod mechanism through the reducer, so that the cutter bar drives the upper cutter head to make reciprocating motion, and the lower cutter head is fixed on the tool carrier. The power cord is a double core sheathed flexible cable, which forms a non reconnection plug with a double post rubber plug.

Operation process

1. Charge the battery for 5 hours (the first 12 hours)

2. Before using the tool, unplug the charger plug and disconnect the tool from the charger (the tool will not work when connected with the charger)

3. Remove the blade sheath

4. Turn on the power manually

5. Before cutting, let the cutting blade run for a few seconds without load, and listen to the sound for noise, too slow and too fast